How To Install A Light Kit On Ceiling Fan

Download Article

Download Article

Ceiling fans come in a wide diverseness of styles and designs. Many ceiling fans are sold without a calorie-free attached to them merely that doesn't ever fit the needs you may take in a room. If you already have a ceiling fan just information technology doesn't accept a light, it doesn't mean you lot can't take a light unless you totally replace the fan. You may be able to add ane to your existing fan past following these elementary directions.

1. 

   one

   Turn off the power to your existing ceiling fan. Begin any project involving electricity by turning off the source of ability.^[i]

   • This does not just mean flipping off the switch on the wall, equally it could easily accidentally get turned back on mid project. Instead, go to your circuit box and plow off the whole circuit.^[2] If yous are unsure of which circuit y'all are working on, play is condom and only turn off the whole panel. A few minutes of no ability is worth your safety.

2. 

   2

   Determine whether the bottom of your ceiling fan has a housing cap. This is the area at the center of a ceiling fan where an optional light associates volition go. Unscrew any screws in this surface area and pull off any decorative plates or covers that are concealing light attachment points and wires.^[iii]

   • Some ceiling fans will not adjust the add-on of a low-cal kit but quite a few will. Many times when a ceiling fan is designed, it can exist built with an optional lighting assembly. This way a company can use the aforementioned parts for both a cheaper production, with no calorie-free, and a more expensive one, with lights. Because of this, adding a light to your ceiling fan may be a quick and easy job.
   • If your ceiling fan has no housing assembly at the centre of it, then y'all will non be able to attach a lighting assembly. Be sure in that location is no housing cover before you give up, as the way they are attached can be hidden with decorative details, such as an embellished cover.

   Advertisement

3. 

   three

   Assess whether at that place are wires inside the housing for a lighting associates. Considering you lot will want to be able to command the light and the fan separately, there will need to be existing wiring inside the housing to allow light assembly operation. Y'all should run across several wires inside the housing that are capped off by themselves with wire nuts. They could be a variety of colors but almost likely will be black (power) and white (neutral).^[4]

   • With whatever luck the wires inside the housing volition even be labeled with something like "lighting power" or something like that. This is a very skillful sign that you will be able to attach a lighting assembly.

4. 

   4

   Measure the zipper point on your ceiling fan. At present that you know yous accept power for a lighting assembly, y'all will need to know the size lighting associates y'all demand to find. Measure the diameter of the opening and pay attention to where screw holes should exist located on a lighting assembly in guild to adhere hands to your existing ceiling fan.

   • Besides make note of the company and fashion name or number of your ceiling fan. Parts from the same company are more probable to fit your existing fan.

5. 

   five

   Visit a home improvement store to find the appropriate ceiling fan light kit. If you cannot find the right part, don't hesitate to enquire someone working at the store to help you.

   • Some companies sell universal ceiling fan lighting kits that fit a multifariousness of their models. Make sure to check that the fashion name or number of your fan is listed as an acceptable match for the lighting associates you buy.
   • If y'all cannot find the right lighting assembly at a home improvement store try elsewhere. A lot of cities now take companies that salve construction parts and resell them to the public. You should also look online at the website of the visitor who manufactured you ceiling fan. They may sell direct to the public or the site may direct you to a company that does.
   • Ceiling fan lighting assemblies come in a diverseness of styles. For instance, you lot volition need to determine whether you would similar to attach a fixture that has one, two, or three low-cal bulb sockets.^[five]

   Advertisement

1. 

   i

   Plough off the excursion breaker that controls the ability to your ceiling fan. Between the time you assessed whether y'all could peradventure adhere a light associates and when you really install it, yous have probably turned back on the excursion billow. Make sure that you plow it off one time again!^{[half dozen]}

2. 

   2

   Unscrew the cap hiding the wires and set information technology aside. Be certain to continue track of the parts you are removing. You volition probably no longer need the cap but you may need any screws that it was attached with.^[7]

3. 

   3

   Connect the light'southward wires to the fan'due south wires with wire basics. This should be done past simply lining upwardly the ii matching wires and then that they are parallel and screwing a wire nut on the stop, like you would a lid on a bottle.^[eight]

   • In about cases you will exist attaching wires that are the same color together. For instance if there is a white and a black wire in the ceiling fan and a white and black wire coming out the dorsum of the lighting associates, simply wire nut like colors together. That being said, it's best to follow any directions that have been supplied with your lighting assembly.

4. 

   4

   Spiral the lighting assembly onto the ceiling fan. This attachment should go smoothly, peculiarly if you accept purchased a lighting assembly designed to exist attached to your ceiling fan.^[9]

5. 

   5

   Install low-cal bulbs, drinking glass shades, and pull chains, following the directions provided by the manufacturer. Usually shades on ceiling fixtures are held in place with thumbscrews, which, when screwed in, simply keep the shades attached with a light corporeality of pressure on multiple sides of the shade.

6. 

   6

   Flip the circuit breaker back on, pull the chain, and bank check out your newly-improved fan! Now you should be able to feel a absurd breeze from the fan while enjoying a brightly lit room.

   Advertisement

Add New Question

• Question

  How do I hook up a ceiling fan low-cal?

  

  Allen Lee
  Home Improvement Specialist

  Allen Lee is a Home Improvement Specialist and the Possessor of Honest Lee Handyman Services, a licensed and insured handyman business servicing Sacramento, California, and surrounding areas. Working with homeowners and businesses to go their pocket-sized repairs done in a timely and efficient manner, Honest Lee Handyman Services provides gutter and dryer vent cleaning along with fixture, contend, drywall, and toilet repairs.

  

  Habitation Comeback Specialist

  Expert Answer

Ask a Question

200 characters left

Include your electronic mail accost to get a message when this question is answered.

Submit

Advertisement

Video

• If you take doubts about being able to complete this project safely, ask someone with feel to help or rent an electrician.

• If you have a calorie-free assembly on your ceiling fan already that has stopped working (and you lot have checked the calorie-free bulbs), you tin can follow these directions to supplant the lighting assembly instead of the whole ceiling fan.

• In some cases it may be less expensive and quicker to simply buy a new ceiling fan that already has a lite attached to it. If you are having problem finding a light kit for your existing ceiling fan you lot may just want to bit information technology and first over with a brand new one.

Advertising

• Flip off the billow (or unscrew the fuse if y'all take an one-time fashioned fuse box) before doing any sort of electrical work. If you are unsure of which fuse or billow controls the excursion you are working on, play information technology safety and plough off the whole panel. A new low-cal isn't worth a trip to the infirmary!

Advertisement

Things Yous'll Need

• Lite Kit
• Ceiling Fan
• Wire Nuts
• Electrical Record
• Lite Bulbs
• Screwdrivers

About This Commodity

Article Summary X

To install a calorie-free on a ceiling fan, outset make sure your ceiling fan has a housing cap with wires within for a lite associates. If information technology doesn't, y'all won't be able to install a lite without replacing the entire fan. If information technology does, become a ceiling fan light kit from a home comeback store, and connect the wires on the low-cal to the wires on the fan using wire nuts. Once you've continued the wires, merely screw the lighting associates onto the ceiling fan, and install a light seedling and glass shade over it. To acquire how to mensurate your ceiling fan so y'all can go the right size kit, ringlet down!

Did this summary aid you?

Cheers to all authors for creating a folio that has been read 76,607 times.

Did this article assistance you lot?

Source: https://www.wikihow.com/Install-a-Light-on-a-Ceiling-Fan

Posted by: porterallic1989.blogspot.com

Share this post